Actually I'm using emWin with a small 2.4" display with ILI9341 controller, used in 16 bits data mode. It works well.
Now I have to replace the display with one from another supplier. The new display is quite similar, but integrates the controller ST7789V3, always in 16 bits data mode. Is it compatible with emWin?
In the manual I read ST7789 and ILI9341 are controllers that share the same driver: GUIDRV_FLEXCOLOR_F66709. However the manual says a generic ST7789. What should I expect with V3 variant of this chip? I don't know what are the differences between V3 and older versions, if critical features have changed.
Now I have to replace the display with one from another supplier. The new display is quite similar, but integrates the controller ST7789V3, always in 16 bits data mode. Is it compatible with emWin?
In the manual I read ST7789 and ILI9341 are controllers that share the same driver: GUIDRV_FLEXCOLOR_F66709. However the manual says a generic ST7789. What should I expect with V3 variant of this chip? I don't know what are the differences between V3 and older versions, if critical features have changed.