Hi,
I'm using JLink EDU firmware V9.30 and I need to update at least to the V10. I've found this version (JLink_V11.bin) in the firmware folder op/SEGGER/JLink_V780d/Firmwares
However, I'm not able to update the firmware using the SEGGER J-Link Configuration software. The output Log message is
Not updated, probe/ programmer firmware is already up to date
Here's the JLink EDU information
Product = J-Link EDU V9.30
Nickname =
SN = 269301238
USB = SN 269301238
HostFW = 2021 May 7 16:26
EmuFW = 2021 May 7 16:26
Please, how can I update this?
gaston
I'm using JLink EDU firmware V9.30 and I need to update at least to the V10. I've found this version (JLink_V11.bin) in the firmware folder op/SEGGER/JLink_V780d/Firmwares
However, I'm not able to update the firmware using the SEGGER J-Link Configuration software. The output Log message is
Not updated, probe/ programmer firmware is already up to date
Here's the JLink EDU information
Product = J-Link EDU V9.30
Nickname =
SN = 269301238
USB = SN 269301238
HostFW = 2021 May 7 16:26
EmuFW = 2021 May 7 16:26
Please, how can I update this?
gaston
The post was edited 1 time, last by gschelotto ().