Hi,
I need to program GD32F310F4/8 devices in production via SWD and miss the security feature which seems to be missing for all GD32F3x0.
These two option byte registers OB_SPC/OB_SPC_N cannot be written from .hex file and there is no project option to set them.
Writing them seems is possible via FMC_WP register.Is there a way to support this or another way to set these during mass programming? I don't want to set these in firmware for flash memory reduction.
Thanks in advance & best regards,
Alex
I need to program GD32F310F4/8 devices in production via SWD and miss the security feature which seems to be missing for all GD32F3x0.
These two option byte registers OB_SPC/OB_SPC_N cannot be written from .hex file and there is no project option to set them.
Thanks in advance & best regards,
Alex