[SOLVED] Whether Jlink supports dormant method to switch JTAG to SWD

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Hi,
    sorry for the delay in response.

    This is on our ToDo already, however we did not manage to implement this as the
    demand for this feature is currently still very low, so other projects are prioritized.
    Support is planned until the end of this year.
    If you require this feature earlier, you could add it yourself for your device, using a J-Link Script FIle with an InitTarget() function establishing the connection:
    wiki.segger.com/J-Link_script_files#InitTarget.28.29

    BR
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • SEGGER - Fabian wrote:

    Hi,
    sorry for the delay in response.

    This is on our ToDo already, however we did not manage to implement this as the
    demand for this feature is currently still very low, so other projects are prioritized.
    Support is planned until the end of this year.
    If you require this feature earlier, you could add it yourself for your device, using a J-Link Script FIle with an InitTarget() function establishing the connection:
    wiki.segger.com/J-Link_script_files#InitTarget.28.29

    BR
    Fabian

    Thank you very much