I'm collecting trace data using J-Trace and Ozone. It is meant for Code Coverage purposes and our test procedures involve several Soft Resets. After a Soft Reset the orange TRACE LED on J-Trace is active, however Ozone stops receiving trace data. Is there a ways for Ozone to keep collecting data after a Soft Reset ?

Thanks. Will give it a go.

Adding a breakpoint at the beginning of main() does the job. After a reset execution stops at the breakpoint and, after resuming execution trace data is being collected.

Is there a way to script this operation? Detect a halt on a breakpoint and call Debug.Continue() automatically ?

Thanks for the link. I got the example running just fine, however on my nRF52832 project the callback does not seem to be working.
See my jdebug file below

void OnProjectLoad (void) {

Project.SetDevice ("nRF52832_xxAA");
Project.SetHostIF ("USB", "");
Project.SetTargetIF ("SWD");
Project.SetTIFSpeed ("4 MHz");
Project.SetTraceSource ("Trace Pins");
Project.SetTracePortWidth (4);
Project.AddSvdFile ("Cortex-M4.svd");
Edit.SysVar (VAR_TRACE_MAX_INST_CNT, 2000000000);
Edit.SysVar (VAR_TRACE_TIMESTAMPS_ENABLED, 0);
Edit.SysVar (VAR_TRACE_CORE_CLOCK, 64000000);
File.Open ("C:/Dev/projects/development/IDE/armgcc/Output/DEBUG/Exe/OUT.elf");

Util.Log("---Automation started.---");
Debug.SetResetMode(RM_RESET_AND_RUN);

Break.SetOnSrc("main.c:156");
Break.SetCommand("main.c:156","OnBPHit");
Debug.Start();
}


void OnBPHit(void) {
Util.Log("---BP hit!---");
Util.Sleep(1000);
Debug.Stop();
File.Exit();
}

void AfterTargetReset (void) {
_SetupTarget();
}

void AfterTargetDownload (void) {
_SetupTarget();
}


void _SetupTarget(void) {
unsigned int SP;
unsigned int PC;
SP = Target.ReadU32(<SPLocation>);
Target.SetReg("SP", SP);
PC = Target.ReadU32(<PCLocation>);
Target.SetReg("PC", PC);
}