[SOLVED] I.MX6UL (MCIMX6G2) support in segger j-link plus

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] I.MX6UL (MCIMX6G2) support in segger j-link plus

    Hi Team,
    We are trying to connect NXP's i.MX6UL (MCIMX6G2) board with j-link plus and keep on getting below error.

    > TotalIRLen = ?, IRPrint = 0x..000000000000000000000000.

    I have attached the error message. Is there any hardware modification needed or script file available for connection?
    We can not able to connect with SWD interface also.

    I hope someone can help on this. Many thanks in advance.

    Amutha S
    Images

    • jlink_error.png

      63.07 kB, 828×819, viewed 153 times

  • Hi Amutha S,
    Thank you for your inquiry.


    Could you please follow the troubleshooting article on the page linked below
    and send us a screenshot of the entire J-Link Commander output?
    wiki.segger.com/J-Link_cannot_…the_CPU#Target_connection

    BR,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.