As shown in the screenshot, if I click OK, jscope will crash.
[SOLVED] jscope new project always crash
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
-
Hi,
We can reproduce this issue and will work on a fix for this ASAP.
Thanks for bringing this to our attention!Please read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
In the v7.64d J-Link Software, I can still reproduce this problem. However, it is clearly marked as fixed in the release notes.
-
Hi,
the only J-Scope fix that made it into 7.64d was the following:
Options dialog: The project settings were not updated after pressing "OK". Introduced with V7.64c. Fixed.
This is a different issue that is totally unrelated to the issue you described.
It does neither mention a crash nor MacOS.
So I am not sure where you take the information from that the issue you raised was "clearly marked as fixed"?
Unfortunately the issue you raised was not yet fixed, but we are working on it.
BR
FabianPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
Sorry, I misunderstood. I also read the jscope fix record. I thought it was to fix the problem I mentioned.
-
Hello,
a fix for this issue is ready and will be included in the next version (7.64f) of the J-Link software package scheduled for some time next week.
Thank you for bringing this to our attention.
Best regards,
MatthiasPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.