[SOLVED] J-Trace PRO not accessible Win11

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Trace PRO not accessible Win11

    I changed to Win11 and now the Jtrace pro is not accessible over TCP. I use JLink 7.2

    The error from JLink is:

    LOG: J-Link RTT Viewer V7.62c: Logging started.
    LOG: Terminal 0 added.
    LOG: Connecting to J-Link via TCP/IP...
    ERROR: Can not connect to J-Link via TCP/IP (192.168.178.29, port 19020)
    Cannot connect to J-Link.
    ERROR: Could not connect to J-Link.
    Images

    • Screenshot 2022-04-05 085043.png

      93.04 kB, 859×382, viewed 137 times

    • Screenshot 2022-04-05 085315.png

      30.79 kB, 897×243, viewed 127 times

  • Hi,
    Good to hear that you were able to resolve this issue.

    We will close this thread now.

    BR
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.