I had install the driver for Apple M1. I am running window 11 on my Mac M1 with parallels and I needed the driver for the J-Link to work with Keil uVision. The problem is that they detect the J-Link edu in windows but it said that the drivers are not installed.
[SOLVED] M1 Parallels Windows 11 Drivers
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
As the M1 silicon is ARM based, you are running Windows ARM on it I guess.
Maybe this helps:
wiki.segger.com/J-Link_on_Windows_ARMPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
In response to my post, your latest one does not make any sense…
Does the link help or not?Please read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
Hi,
Alex pointed out a tip about what might be done wrongly here. Could you please try that?
BR
SEGGER - Alex wrote:
As the M1 silicon is ARM based, you are running Windows ARM on it I guess.
Maybe this helps:
wiki.segger.com/J-Link_on_Windows_ARM
FabianPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.
-
Share