[ABANDONED] Ozone -- Top of stack - no unwinding symbols at <address>

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Ozone -- Top of stack - no unwinding symbols at <address>

    Debugger: Ozone 3.26b
    RTOS: embOS 5.14.0.0
    Compiler: gcc-arm-none-eabi-10-2020-q4-major or gcc-arm-none-eabi-7-2018-q2-update (Issue identical on with both tool chains)
    Host OS: macOS Big Sur 11.6.2 or Ubuntu Linux 18.04 LTS (Issue identical on both macOS and Linux)

    When I debug using Ozone, the call stack is effectively empty with only the current execution position.

    There is a message "Top of stack - no unwinding symbols at <address>"

    When I debug using Eclipse + Embedded C/C++ J-Link Debugging plugin + JLinkGDBServer, the call stack, local variables, global variables all work correctly.

    Here is a screen shot of the Ozone Call Stack window.



    Your suggestions are welcome and appreciated.

    The post was edited 1 time, last by morrisrx: Tested second compiler tool chain. Same problem. ().

  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.
    Could you provide a example project for reproduction that would run on an eval board?

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.