[CLOSED] J-Link USB windows 10 connection problem

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [CLOSED] J-Link USB windows 10 connection problem

    Good day!

    I am a new user of a J-Link USB that I am trying to use for JTAG software downloads to an ARM processor. The problem I have is that the USB connection doesn't appear to be registered on my Windows 10 laptop. The red led on the J-Link doesn't light up either.

    I have tried going into the control panel for a manual installation but, no joy.

    I have the V7.58e J-Link software integrated with the IAR Compiler for ARM Workbench version 9.20.2.

    My searches on this forum were not successful but, if I missed something simple or obvious, I would appreciate a pointer to a solution.

    TIA,
    Sid

  • The J-Link in question is a J-Link clone.
    Using J-Link clones with the J-Link software is illegal.

    Thread closed.
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.