[SOLVED] Can Flasher Portable Plus erase chip before writing firmware in standalone mode?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Can Flasher Portable Plus erase chip before writing firmware in standalone mode?

    Hi

    We couldn't find erase operation on j-flash V7.50a's init step.

    How can we erase chip before writing firmware in standalone mode?

    we use nRF52833 devices.(Nordic)

    that operation can do?


    Best regards.

  • Hi,
    We will close this thread as you also contacted us via Support Ticket system.

    Please keep to one channel of communication for future requests,
    as otherwise:
    - response times get higher because of a higher work load on our side.
    - information might be lost between the channels.

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.