[SOLVED] Target definition inaccuracy STM32H725

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Target definition inaccuracy STM32H725

    The STM32h725ZG has 564k of RAM. P


  • Hello,

    Thank you for your inquiry.
    I assume you tried to post pictures, but they are not showing up the way you post them and the links don't work.

    But from the title I assume that you mean that in the target selection dialogue the device is listed with less RAM than there theoretically is according to the datasheet, correct?
    In that case the behaviour is expected as it only displays the WorkRAM that J-Link needs for our Flashloaders to work.
    It says nothing about the actual max. RAM size. You can of course use all RAM that is advertised by ST here in your application.

    Best regards,
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.