Default behavior of J-Link with an XMC1400

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Default behavior of J-Link with an XMC1400

      Hi,

      In this document wiki.segger.com/Infineon_XMC1000 is it written that "By default, J-Link changes the BMI from ASC_BSL to SWD0 (P0.14 & P015 used for SWD) if the BMI of the device is ASC_BSL". I have an XMC1400 with BMI of ASC BSL(I confirmed it with Memtool), I connect my Jlink device and nothing happens. It didn't change the BMI automatically. Am I understanding that quoted line incorrect?

      Thanks
    • Hi,
      Thank you for your inquiry.

      Could you please
      - open the J-Link Commander (JLink.exe)
      - try if using the SetBMI / GetBMI commands solve this issue?


      Best regards,
      Fabian
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.