SystemView Configuration for ARM Cortex-R4F Family

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • SystemView Configuration for ARM Cortex-R4F Family

      Hi,

      We are using TI's TMS570LS3137 MCU in our project. We develop software on FreeRTOS. We want to integrate SystemView into the software for real-time analysis, but we could not find a compatible configuration for the ARM Cortex-R4F family.
      Can you help with this?

      Best Regards,
      Eyup SAYIN
    • Hello,

      Thank you for your inquiry.
      We do not ship any examples for Cortex-R4. But you can use the existing example configs as reference to create your own.
      For FreeRTOS you can find the Cortex-M sample for reference.
      For embOS there are also a couple of Cortex-A samples that will be similar to what you need for Cortex-R.

      All other needed information can be found in the SystemView manual.
      A generic guide on how to instrument FreeRTOS to enable SystemView is explained here:
      wiki.segger.com/FreeRTOS_with_SystemView

      Best regards,
      Nino
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.