Hello
I have got a JLink plus and SWD isolator
From the User manual UM08021-R1, I understand that I can power the target from J-Link via SWD isolator
"The target side draws power from pins 1 or 2, the emulator side draws power
from pin 19. "
Pins 1 or 2 are the pins from the target connector and pin 19 is from the emulator connector , right ? You do not say explicity which connector.
I do not see any dc-dc isolator which can transfer power from emulator side to target side.
If i power the target from pins 1 or 2 from the emulator connector , then the isolation looses its purpose.
It would be usefull to provide a Jlink with a dc-dc converter.
I have got a JLink plus and SWD isolator
From the User manual UM08021-R1, I understand that I can power the target from J-Link via SWD isolator
"The target side draws power from pins 1 or 2, the emulator side draws power
from pin 19. "
Pins 1 or 2 are the pins from the target connector and pin 19 is from the emulator connector , right ? You do not say explicity which connector.
I do not see any dc-dc isolator which can transfer power from emulator side to target side.
If i power the target from pins 1 or 2 from the emulator connector , then the isolation looses its purpose.
It would be usefull to provide a Jlink with a dc-dc converter.