Hello,
we are designing a board based on the TI AM437x with an externAl QSPI boot-flash. The idea is to use a J-Link probe
to program the external SPI-flash via the JTAG.
On the wiki (wiki.segger.com/Open_Flashloader) there are some template projects, but all of them seem to
program the internal flash only.
Processor: AM4377
QSPI-Flash: MX25L3233FZNI-08Q
Is it possible to get a template project for SPI-flash or an example project for SPI-flash
which we can modify for our needs?
Thanks a lot for your help,
have a nice day,
Bernd
we are designing a board based on the TI AM437x with an externAl QSPI boot-flash. The idea is to use a J-Link probe
to program the external SPI-flash via the JTAG.
On the wiki (wiki.segger.com/Open_Flashloader) there are some template projects, but all of them seem to
program the internal flash only.
Processor: AM4377
QSPI-Flash: MX25L3233FZNI-08Q
Is it possible to get a template project for SPI-flash or an example project for SPI-flash
which we can modify for our needs?
Thanks a lot for your help,
have a nice day,
Bernd