[SOLVED] It is bad experience to list connected CMSIS-DAP probes with JLink.exe

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] It is bad experience to list connected CMSIS-DAP probes with JLink.exe

    Hi,

    We are very happy that the JLink V7 support CMSIS-DAP probes.

    But it is not good the serial number of CMSIS-DAP are converted to short id by JLink.
    So I cannot get correct SN for specific board when there are multiple CMSIS-DAP devices. Like below picture.



    So is possible to use origin SN as the USB identification in JLink?
    Images

    • Untitled picture.png

      38.4 kB, 768×387, viewed 226 times

  • Hello Haly,

    As you have already contacted us via the support system, this thread will be closed.

    Could you please avoid contacting us on multiple channels, as this doubles the work on our side and makes things slower for both sides?


    BR
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.