[SOLVED] J-Link IAR not support Nordic nRF9160 - why?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Link IAR not support Nordic nRF9160 - why?

    Hello,

    I tried to get a device of the nordic nRF9160 flashed with a IAR J-Link. I can't seem to find any reason why this doesn't work, the error Message is:
    the connected j-link does not support the armv8-m
    The firmware is up to date. Is the device just prohibited with the J-Link? I could not find a list specifying the supported devices.
    Can anyone point me in the right direction, as this is a jungle of different J-Link devices which differ in many different capabilities and I am new to this.
    Am I doing something wrong or do I have to buy a better J-Link?
    Thanks
    Jojo
  • The IAR J-Links have been discontinued years(!) before the nRF91 was released.
    You also do not expect your Windows 2000 to run the latest software from 2015-2020, right?
    It is similar for this J-Link and MCU support…

    We recommend to get a new J-Link:
    segger.com/purchase/trade-in-program/


    BR
    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.