[SOLVED] QSPI indirect flashing SAM V71 + ISSI IS25LP064

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] QSPI indirect flashing SAM V71 + ISSI IS25LP064

    Hello everyone,

    I need to write to the external QSPI fash indirectly using J-Flash.
    The standard RAMcode works on the deveopment board but the circuit I'm using is a bit different and needs GPIO PA26 to be involved in the QCS Chip Enable.

    Is there anyone that can help me with RAMcodecustomization?

    Thanks in advance.

    K

  • Hi K,
    Thank you for your inquiry.

    Could you please open a ticket in our support ticket system for that?
    You can find the link below in my signature.

    Information we would require in the ticket:
    1) Reference of this thread by link.
    2) Pins you are using for QSPI
    3) Is it a custom or evaluation board? If evaluation board, which one?

    As all further communication will be handled over email,
    we will close this thread now.

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.