Hi,

I am using SystemView on my project and it seems to work well as the execution times and periodic events match with what I expected.
There is one thing that I do not understand is that the Idle % does not match with (100% - Sum of CPU load %). -> Picture1
I count 13,08% of CPU load so I expect to have 86,92% Idle but I got 96,19% ? Am I wrong ?

Another things I noticed :
-While recording, "Idle %" is not steady, even after several seconds. I think the value in the column "CPU Load" is average for the recording duration, am I wrong ?
-The timestamped thread say very often "Idle For xxx ms" (where xxx is several hundreds of milliseconds) but in the timeline, I do not find this kind of time. Idle time seems to be always between 0 and 1ms (And it is what I expect as my Systick is 1ms) -> I attached an example of this issue (Picture2)

I am using :
-SystemView v3.10
-uCOS-II V2.92.16
-J-Link Ultra+ 4.4

Thanks for your help

Picture1

Picture2