[SOLVED] Segger 5.34 displays RAM use erroneously

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Segger 5.34 displays RAM use erroneously

    The Segger 5.34 IDE displays identical project RAM use oddly: .stack_process uses 64k, stack 3.1%. The project file sets stack_process =0.
    The program still works as it does in 5.32, where stack is 3.1%, no .stack_process
    Borje
    Images
    • SeggerRAM.jpg

      46.81 kB, 486×387, viewed 239 times
  • Hello,

    Thank you for your inquiry.
    We are aware of this issue and it will be fixed in the next release.

    It is only a display issue and has no impact on your target application.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.