[SOLVED] SystemView with Ambiq Apollo3 Blue

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] SystemView with Ambiq Apollo3 Blue

    I would like to evaluate SystemView with my current project, it uses Ambiq Apollo3 Blue MCU. The port of FreeRTOS is supplied by Ambiq, v10, however the patch file and the Ambiq port seem quite different.

    Has anyone had success getting this combination of SystemView and Apollo3 working?
    Sid

  • Hi Sid,

    Generally any RTOS/Application can be instrumented using SystemView.
    So it will work.

    But we do not have example projects for that specific setup and if Ambiq has its own FreeRTOS fork the generic patch file will not work.

    What we can offer is to create an embOS BSP for the Apollo3 EVB which will natively support SystemView:
    segger.com/products/rtos/embos…cortex-m-embedded-studio/

    In that case NREs would apply.
    Would that be of interest for you?

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.