Hi,
I was hopping to use my Jlink to program an old C8051F327 board. I was really happy to see that the Silicon Labs Simplify Studio already supports the JLink out of box but unfortunately even if many of the C8051FXXX parts are supported the C8051F327 is not.
I have tried to configure a random C8051FXXX device but the JLINKExe refuses to connect via the C2 because it gets a wrong device id.
It should be fairly straight forward to add support for this device since other C2 C80851 devices are already supported but I am not sure how to do so, hence I would really appreciate if anyone could help me with this.
I was hopping to use my Jlink to program an old C8051F327 board. I was really happy to see that the Silicon Labs Simplify Studio already supports the JLink out of box but unfortunately even if many of the C8051FXXX parts are supported the C8051F327 is not.
I have tried to configure a random C8051FXXX device but the JLINKExe refuses to connect via the C2 because it gets a wrong device id.
It should be fairly straight forward to add support for this device since other C2 C80851 devices are already supported but I am not sure how to do so, hence I would really appreciate if anyone could help me with this.