[SOLVED] j-link for BBC micro:bit v2

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] j-link for BBC micro:bit v2

    Hello everyone,

    I want to use j-link on BBC micro:bit v2.

    so, I tried to write the firmware image on this page segger.com/products/debug-prob…-microbit-j-link-upgrade/

    It worked well on micro:bit v1.

    but It didn't work on the micro:bit v2.

    I understood that it is different from v1 and v2.

    is there the firmware of j-link for the micro:bit v2 ?

    Are there any plans to provide j-link firmware for micro: bit v2 ?

    regards.
  • Hello,

    Thank you for your inquiry.
    We were not aware of a new hardware revision of the board.
    The SEGGER website is only valid for revision V1.x

    We will order v2 hardware and see what can be done. But we do not expect to receive the boards before January.

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • Hi,
    Did you have time to test this?
    Is everything working as expected?

    Best regards,
    Fabian
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/


    Or you can contact us via e-mail.
  • Hi,
    As no feedback came from you,
    we assume everything is working as expected now.

    We will close this thread.

    Best regards,
    Fabian
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/


    Or you can contact us via e-mail.