Use SystemView v3.20 and Ozone v3.20c simultaneously

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Use SystemView v3.20 and Ozone v3.20c simultaneously

      Hi,

      I'm trying to use both SystemView and Ozone to debug my application.
      As per this thread: [SOLVED] Use SystemView 3 alongside Ozone?
      I've disabled RTT in Ozone, but SystemView still does not work while Ozone is active.

      This is what happens:
      • I can use SystemView when Ozone is not in active debug session
      • When I set up SystemView to record while Ozone has loaded and halted the program, as soon as I start the program, SystemView stops recording and shows empty trace
      • I have disabled RTT in Ozone by

      Source Code

      1. OnProjectLoad() : Project.SetRTT(0);
      and also tried the same thing manually.


      Regards
    • Hello,

      Thank you for your inquiry.
      Such an issue is not known to us.

      Could you give the latest Ozone version a try? Does it work then?

      Best regards,
      Nino
      Please read the forum rules before posting: Forum Rules

      Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.