[ABANDONED] Use SystemView v3.20 and Ozone v3.20c simultaneously

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Use SystemView v3.20 and Ozone v3.20c simultaneously


    I'm trying to use both SystemView and Ozone to debug my application.
    As per this thread: [SOLVED] Use SystemView 3 alongside Ozone?
    I've disabled RTT in Ozone, but SystemView still does not work while Ozone is active.

    This is what happens:
    • I can use SystemView when Ozone is not in active debug session
    • When I set up SystemView to record while Ozone has loaded and halted the program, as soon as I start the program, SystemView stops recording and shows empty trace
    • I have disabled RTT in Ozone by

    Source Code

    1. OnProjectLoad() : Project.SetRTT(0);
    and also tried the same thing manually.

  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.

    Could you give the latest Ozone version a try? Does it work then?

    Best regards,
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.