Adaptive clocking does not work properly

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • Adaptive clocking does not work properly

    Hi,

    I am trying to use J-Link RDI with LPC2000, but there is an error when using adaptive clocking.

    This error is apparent with the latest beta version V379z02, but version V378d works OK.

    The post was edited 1 time, last by zhongyb ().

  • Hello zhongyb,

    unfortunately we can not reproduce the problem.
    We have tested:
    - LPC2378 (MCB2300 Keil Eval board) with IAR 5.11/4.42 and RDI with adaptive clocking
    - LPC2129 (MCB2100 Keil Eval board) with Keil uVision 3.20 and RDI with adaptive clocking

    In both cases there were no problems when downloading and debugging the program.

    In order to analyze this problem, the following information would be useful:
    - Information about the hardware and the debugger you used
    - Project file
    - J-Link logfile
    - J-Link RDI logfile

    Could you please send an e-mail to support@segger.com with
    a detailed description of the problem and the information requested above?

    Best regards,

    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.
  • We have built a new version of the J-Link ARM
    software in which this problem is solved.

    The new version (V3.80a) is available for download from our website:
    segger.com/download_jlink.html

    Best regards,

    Alex
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.