Hi All,
Currently i have a separate build tool chain (Scons, autotools,cmake ...) that generates the .hex .elf .map files.
I followed this tutorial to flash and debug correctly my target (tested (STM32L053R8)).
wiki.segger.com/J-Link_Visual_Studio_Code
Once again congratulation to the Segger team for such a description. I tested and adapted it to my target on a Linux and Windows.
Just a hint, on the linux plattform, i had to add the : "armToolchainPath": "/home/sbm_linux/gcc-arm-none-eabi-9-2020-q2-update/bin/" in the launch json file.
Nonetheless, I would prefer using Embedded Studio IDE for the same purpose (only debugging, flashing purposes). I think the IDE is made for this purpose and does what it has to do for any plattform.
I tried to load the elf file in the environment and hence had no luck no flash or debug the STM32 target. Is there any step by step tutorial/documentation for this scenario?
For example in IAR workbench IDE (Sorry for mentioning your competitors), i just have to load the elf, select the target and the HW probe and this works, i can debug, watch viariables ,breakpoints ..... In Embedded Studio i didn t find the way. Is this possible?
Another and last point, where and how i can get the svd file for a given target ? Is the silicon(STM32L053R8) provider the responsible to provide this?
Thanks in advance.
Sugs
Currently i have a separate build tool chain (Scons, autotools,cmake ...) that generates the .hex .elf .map files.
I followed this tutorial to flash and debug correctly my target (tested (STM32L053R8)).
wiki.segger.com/J-Link_Visual_Studio_Code
Once again congratulation to the Segger team for such a description. I tested and adapted it to my target on a Linux and Windows.
Just a hint, on the linux plattform, i had to add the : "armToolchainPath": "/home/sbm_linux/gcc-arm-none-eabi-9-2020-q2-update/bin/" in the launch json file.
Nonetheless, I would prefer using Embedded Studio IDE for the same purpose (only debugging, flashing purposes). I think the IDE is made for this purpose and does what it has to do for any plattform.
I tried to load the elf file in the environment and hence had no luck no flash or debug the STM32 target. Is there any step by step tutorial/documentation for this scenario?
For example in IAR workbench IDE (Sorry for mentioning your competitors), i just have to load the elf, select the target and the HW probe and this works, i can debug, watch viariables ,breakpoints ..... In Embedded Studio i didn t find the way. Is this possible?
Another and last point, where and how i can get the svd file for a given target ? Is the silicon(STM32L053R8) provider the responsible to provide this?
Thanks in advance.
Sugs
The post was edited 1 time, last by sugs ().