Hi How do I use CLI for STM32G0 for flashing? I could not find device in the supported list?
[SOLVED] Flashed command for STM32G0
This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.
-
-
Hello,
Go to here and search for STM32G0:
segger.com/downloads/supported-devices.php
Then go to here and follow the steps:
segger.com/products/debug-prob…-for-development-purposes
Done.
BR
AlexPlease read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail. -
I was able to follow the steps and program the MCU.
However it does not program correctly.
Also I was not able to use JFlash Gui. I selsected CortexM0 as a device but Jflash could not connect to it. -
Of course it will not work if you select „Cortex-M0“....
This is why we offer different device selections because every device has a different flash algorithm. Cortex-M0 does not tell J-Link ANYTHING about how flash programming for a particular device works.
Did you actually check the links I provided for what the correct device name for you is?Please read the forum rules before posting.
Keep in mind, this is *not* a support forum.
Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
Should you be entitled to support you can contact us via our support system: segger.com/ticket/
Or you can contact us via e-mail.
-
Share
- Facebook 0
- Twitter 0
- Google Plus 0
- Reddit 0