Hi!
I have been trying to program a CC2652P via cJTAG using a J-Trace Pro for Cortex-M, but keep getting the following error message:
ERROR: Debugger tries to select target interface cJTAG.
Is this because the CC2652P is not yet supported? or is there something else wrong here?
It seems to fallback to JTAG and fails, is to expected for it to automatically fallback to JTAG from cJTAG?
Thanks!
Display All
I have been trying to program a CC2652P via cJTAG using a J-Trace Pro for Cortex-M, but keep getting the following error message:
ERROR: Debugger tries to select target interface cJTAG.
Is this because the CC2652P is not yet supported? or is there something else wrong here?
It seems to fallback to JTAG and fails, is to expected for it to automatically fallback to JTAG from cJTAG?
Thanks!
Source Code
- Application log started
- - J-Flash V6.87f (J-Flash compiled Oct 26 2020 09:59:59)
- - JLinkARM.dll V6.87f (DLL compiled Oct 26 2020 09:59:13)
- Reading flash device list [C:\Program Files (x86)\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
- - List of flash devices read successfully (451 Devices)
- Reading MCU device list ...
- - List of MCU devices read successfully (8037 Devices)
- Creating new project ...
- - New project created successfully
- Connecting ...
- - Connecting via TCP/IP to 192.168.18.215
- - Probe/ Programmer firmware: J-Trace PRO V1 Cortex-M compiled Jun 9 2020 13:39:24
- - ERROR: Debugger tries to select target interface cJTAG.
- This interface is not supported by the connected emulator.
- Selection will be ignored by the DLL.
- - Device "CC1352P1F3" selected.
- - Target interface speed: 65534 kHz (Fixed)
- - VTarget = 3.380V
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - InitTarget: Can not find ICE-Pick (IDCODE mismatch). Expected 0x0B00002F, found: 0x00000000
- - ERROR: InitTarget(): PCode returned with error code -1
- This interface is not supported by the connected emulator.
- Selection will be ignored by the DLL.
- - ERROR: Failed to connect.
- Could not establish a connection to target.