hello
i am trying to connect to the bitcraze ai-deck with the jlink edu mini.
i get the following error message
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. <Default>: RISC-V
Type '?' for selection dialog
Device>RISC-V
Please specify target interface:
J) JTAG (Default)
S) SWD
T) cJTAG
TIF>JTAG
Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
JTAGConf>-1,-1
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>4000
Device "RISC-V" selected.
Connecting to target via JTAG
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
Cannot connect to target.
J-Link>exit
could you please explain what am i doing wrong and how can i fix it.
regards
rodrigo calvo
rudiger46@yahoo.com.au
i am trying to connect to the bitcraze ai-deck with the jlink edu mini.
i get the following error message
Type "connect" to establish a target connection, '?' for help
J-Link>connect
Please specify device / core. <Default>: RISC-V
Type '?' for selection dialog
Device>RISC-V
Please specify target interface:
J) JTAG (Default)
S) SWD
T) cJTAG
TIF>JTAG
Device position in JTAG chain (IRPre,DRPre) <Default>: -1,-1 => Auto-detect
JTAGConf>-1,-1
Specify target interface speed [kHz]. <Default>: 4000 kHz
Speed>4000
Device "RISC-V" selected.
Connecting to target via JTAG
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
ConfigTargetSettings() start
ConfigTargetSettings() end
TotalIRLen = 4, IRPrint = 0x05
JTAG chain detection found 1 devices:
#0 Id: 0x149511C3, IRLen: 04, Custom J-Link TAP
RISC-V behind DAP detected
DAP error while determining CoreSight SoC version
Cannot connect to target.
J-Link>exit
could you please explain what am i doing wrong and how can i fix it.
regards
rodrigo calvo
rudiger46@yahoo.com.au