[SOLVED] Segger Embedded Studio ARM5.1 Project: Call from section .text.libc.__aeabi_errno_addr made to __aeabi_read_tp but __aeabi_read_tp is a symbol without the low bit set

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Segger Embedded Studio ARM5.1 Project: Call from section .text.libc.__aeabi_errno_addr made to __aeabi_read_tp but __aeabi_read_tp is a symbol without the low bit set

    Dear Segger Forum,

    after updating to Segger Embedded Studio ARM5.1 I got the following Linker Error:


    "C:/Program Files/SEGGER/SEGGER Embedded Studio for ARM 5.10b/bin/segger-ld" --defsym=__STACKSIZE__=4096 --defsym=__STACKSIZE_PROCESS__=4096 --defsym=__HEAPSIZE__=64000 --full-section-headers -ereset_handler --defsym=__do_debug_operation=__do_debug_operation_mempoll -EL -mcpu=7E-M --defsym=__vfprintf=__vfprintf_float_long --defsym=__vfscanf=__vfscanf_int --silent --list-all-undefineds --fatal-warnings --gc-sections "-TC:/Users/so/Documents/Repos/Z-Platform-Projects/Analog-Out-Modul-STM32L452-Config/emStudio/Linker Script File/STM32L452RETX_FLASH.icf" --map-text --map-file=Debug/ecom-Analog-Out-Modul.map --map-standard --log-file Debug/ecom-Analog-Out-Modul.log -u_vectors -o Debug/ecom-Analog-Out-Modul.elf --emit-relocs --start-group @C:/Users/so/Documents/Repos/Z-Platform-Projects/Analog-Out-Modul-STM32L452-Config/emStudio/Debug/ecom-Analog-Out-Modul.ind --end-group

    Call from section .text.libc.__aeabi_errno_addr made to __aeabi_read_tp but __aeabi_read_tp is a symbol without the low bit set
    Call from section .text.libc.__aeabi_errno_addr made to __aeabi_read_tp but __aeabi_read_tp is a symbol without the low bit set
    Call from section .text.libc.__aeabi_errno_addr made to __aeabi_read_tp but __aeabi_read_tp is a symbol without the low bit set
    Call from section .text.libc.__aeabi_errno_addr made to __aeabi_read_tp but __aeabi_read_tp is a symbol without the low bit set
  • Hello,

    Thank you for your inquiry and keeping us updated.
    Good to hear that you are up and running again.
    We will mark this thread as solved now so others can find this thread in future.

    Best regards,
    Nino
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.