Hi,
We would like to access the print outputs of the SEGGER_RTT_WriteString() function via a JLINK compact debugger using Python.
The latter is wired only via SWDIO, SWDCLK, VMCU and GND of the nRF52840 IC.
Is there a clever way to do this in order to not use a wired UART connection.
example:
Hereby we would replace
printf("\r\nUART started.\r\n");
(which can be read in python by using pyserial readlines())
with
SEGGER_RTT_WriteString(0,"\r\n RTT started.\r\n");
and read this string in Python.
Thanks in advance,
Kind regards,
Tom
We would like to access the print outputs of the SEGGER_RTT_WriteString() function via a JLINK compact debugger using Python.
The latter is wired only via SWDIO, SWDCLK, VMCU and GND of the nRF52840 IC.
Is there a clever way to do this in order to not use a wired UART connection.
example:
Hereby we would replace
printf("\r\nUART started.\r\n");
(which can be read in python by using pyserial readlines())
with
SEGGER_RTT_WriteString(0,"\r\n RTT started.\r\n");
and read this string in Python.
Thanks in advance,
Kind regards,
Tom