[ABANDONED] Exception table sections and plain sections cannot be mixed

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Exception table sections and plain sections cannot be mixed

    Hi there,

    I'm attempting to link in a static library archive to my nRF52840 targeted project and receive the following error:

    Exception table sections and plain sections cannot be mixed

    I note that there's an abandoned question on this that was directed to support. Furthermore, I've not been able to find a description of this error. I suspect that it is something to do with the way I've built the static library archive, which is written in Rust and therefore generated outside of the Segger IDE.

    I'm also posting to the Rust Embedded forum but thought I'd better ask here also, in case it is something Segger Linker specific.

    Thanks for any help.

  • Hello,

    Thank you for your inquiry.
    Such an issue is not known to us.
    Do you see the same behaviour with the latest Embedded Studio version?
    segger.com/downloads/embedded-studio/

    If yes, could you provide an example project where the issue is reproducible with?

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.