[ABANDONED] SWO buffer transmission when probe disconnected

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] SWO buffer transmission when probe disconnected

    Hi,

    On V6.84a with JTracePro cortex (I think it also happens with JLink Pro) and streaming SWO when the probe is physically disconnected the SWO channel is continually flooded with old data.

    Easiest way to reproduce is to connect to the SWO output of JLinkGDBServerExe using telnet or similar and then when the application is running just unplug the USB connector on the JTrace. The channel floods.

    Regards

    DAVE
  • Hi Dave,
    Thank you for the inquiry.

    We will be looking into this.

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.