[ABANDONED] unable to flash/convert my ST-Link V2 to J-Link on my ST32F769I DISCO board

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] unable to flash/convert my ST-Link V2 to J-Link on my ST32F769I DISCO board

    HI All ,

    I have been trying to flash the STLink-V2 to J-Link on the ST32F769I DISCOVERY board by using all <STLinkReflash.exe>.

    My PC runs on Windows 10. I have both USB SW 'en.stsw-link009' and Jlink installed .

    However I see the following error repeatedly "
    Preparing for FW update (can take up to 10 seconds)...ERROR: Cannot find an ST-LINK, multiple ST-LINKs plugged in, or ST-LINK is in use"



    The STM32F769IDISCOVERY (STM32F769I-DISCO) is listed under Compatible Evaluation Boards.


    Any help in this regard will be appreciated.
    Images
    • Screenshot (25).png

      237.89 kB, 1,366×768, viewed 24 times
    • Screenshot (26).png

      41.32 kB, 1,366×768, viewed 21 times
  • Hi,
    Thank you for your inquiry.
    Did you make sure that the eval board's ST Link is the only ST Link plugged into your PC?

    Best regards,
    Fabian
    Please read the forum rules before posting: Forum Rules

    Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/


    Or you can contact us via e-mail.