Problem with updating screen while using graph

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Problem with updating screen while using graph

      Hello,
      I don't know what is the problem with my project but when I try to update graph the screen have some lines on it.
      UC: STM32f429igt6
      Board: Custom
      Library: STEMWIN 5.34
      Please see the attached image to figure out the problem
      Images
      • image.jpg

        128.09 kB, 1,278×722, viewed 491 times
    • Hi,

      this looks like a hardware issue.

      Which driver are you using?
      GUIDRV_Lin?

      Are the clock settings for the LCD correct (like HSYNC, VSYNC, pixel clock, front and back porch etc.)?

      Regards,
      Sven
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.
    • I think its more with stemwin.
      Previously I was able to use graph widget in LPC1788, library released by NXP.(Hauyo board)

      Also with the same configuration (Clock and external sdram) I was able to use touchgfx on ST board.
      Which driver should I use?

      The post was edited 1 time, last by vahidajalluian ().