[SOLVED] jlink debugging using openOCD without the USB driver "magic" (like Zadig)

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] jlink debugging using openOCD without the USB driver "magic" (like Zadig)

    Hi Guys!

    Is there any way to use jlink ultra and jlink mini with openOCD without changing the driver to winusb using zadig?

    Thank you
    Peter

  • Hi Peter,
    Thank you for your inquiry.

    Currently, the only way is to change the USB driver:
    wiki.segger.com/OpenOCD

    Please note that we do not recommend using OpenOCD in combination with J-Link for the reasons listed in the article above under "Limitations".

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.