[ABANDONED] Failed to update bootloader

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Failed to update bootloader

    I am trying to update bootloader on my FRDM-K66F which is in a brick state right now.
    On erase JLink returns error (-1). Loadbin command shows success however the board remains in dead state.

    Thank you,
    Igor
    Images

    • JTAG.jpg

      257.38 kB, 1,893×1,033, viewed 403 times

  • Hi Igor,
    Thank you for your inquiry.

    Could you please answer the following questions?
    1) How exactly did you "brick" the board?
    2) Does erasing work if you reset the device first?

    Source Code

    1. r
    2. erase
    3) Can you confirm if the data is indeed the correct data after flashing the device?
    4) Does the loadbin command work with a different data file?

    5) Could you please send us a J-Link log file? How to enable:
    wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.