[SOLVED] Flash for infineon XMC1100-0008

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] Flash for infineon XMC1100-0008

    Hi everyone

    I'm using J-Link Base for programming XMC1100-0008. I want to program with a large quantity of chips so I want to use J-FLash or script.
    but J-Flash need to have license. How to get that license.

    Thanks and best regards.
  • Hi,
    Thank you for your inquiry.

    You could upgrade the J-Link Base to a J-Link Plus.

    Please contact sales@segger.com for the necessary steps.

    We will consider this thread as closed.

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.