Hello All,
I need to program an QSPI flash (Macronix MX66L1G45, 128MB) via STM32F769NG, but the available default algorithm of ST_STM32F746G_Disco_QSPI.efi flashloader file doesn´t support this project.
According to JLinkDevices.xml it is the correct algorithm for STM32F769NG.
Further the pin layout is different to the default on.
QSPI_CLK need to be PB2
QSPI_CS need to be PC2
QSPI_D0 need to be PD3
QSPI_D1 need to be PD2
QSPI_D2 need to be PC4
QSPI_D3 need to be PD4
How can I modify the existing ST_STM32F746G_Disco_QSPI.efi file (Pin init and/or QSPI init)?? ,is it possible using the Embedded Studio??
Many thanks in advance,
Regards
Stefan
I need to program an QSPI flash (Macronix MX66L1G45, 128MB) via STM32F769NG, but the available default algorithm of ST_STM32F746G_Disco_QSPI.efi flashloader file doesn´t support this project.
According to JLinkDevices.xml it is the correct algorithm for STM32F769NG.
Further the pin layout is different to the default on.
QSPI_CLK need to be PB2
QSPI_CS need to be PC2
QSPI_D0 need to be PD3
QSPI_D1 need to be PD2
QSPI_D2 need to be PC4
QSPI_D3 need to be PD4
How can I modify the existing ST_STM32F746G_Disco_QSPI.efi file (Pin init and/or QSPI init)?? ,is it possible using the Embedded Studio??
Many thanks in advance,
Regards
Stefan