[Solved] Possible to use ILI6122+ILI5960 or compatible driver with emWin?

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • [Solved] Possible to use ILI6122+ILI5960 or compatible driver with emWin?

      Hello everybody,

      is it possible to use emWin with the ILI6122/ILI5960 driver?
      The ILI6122 supports digital 24-bit parallel RGB input mode, so it won't cause any trouble am I right?
      Is the GUIDRV_Lin driver the right one for it?

      Thank you!
    • Hi,

      If these controllers can be used with an RGB interface (e.g. 16 data lines, HSYNC, VSYNC, data enable, ...) you could connect it to the internal LCD controller of your MCU. In this case the GUIDRV_Lin driver is the proper choice.

      With the GUIDRV_Lin driver emWin simply writes to a piece of memory and the internal LCD controller uses the data to generate the proper signals for the ILI6122/ILI5960.

      Regards,
      Sven
      Please read the forum rules before posting.

      Keep in mind, this is *not* a support forum.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.