[ABANDONED] Jlink Commander Error: Failed to read back RAMCode for verification

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] Jlink Commander Error: Failed to read back RAMCode for verification

    Hi,
    I am using Jlink Commander V6.80. I've 2 boards with MKE15Z256.
    I can connect to the target device and erase/flash one hardware but trying to erase/flash the code on the other gives the error:

    ****** Error: Failed to read back RAMCode for verification.
    Failed to prepare for programming.
    Failed to download RAMCode!
    ERROR: Erase returned with error code -1.

    Attached log.

    However, if I select the micro MKE15Z128 on second hardware, I am somehow able to erase and flash bootloader file but not project file.

    Can anyone please suggest what may be the issue and how to resolve this.

    Thanks in advance.
    Files

  • Hi,
    There is no such issue known to us related to this device.
    We are not able to reproduce this on our side with the latest J-Link J-Link Commander version (downloadable here):


    Setup:
    - FRDM-KE15Z evaluation board
    - J-Link Commander V6.802

    Are you using an evaluation board or custom hardware?
    If evaluation board: Which one?
    If custom hardware: Is this issue reproducible on an evaluation board?
    Is the same application + bootloader running on both boards?
    Could you provide us with a sample .hex file this issue is reproducible with on an evaluation board?

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.