[SOLVED] STM32F429ZI SWO Trace - Timestamping?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] STM32F429ZI SWO Trace - Timestamping?

    Hi!


    I’m completely happy with Embedded Studio, except for one thing:
    I don't know how to make time stamps appear in the "Execution Trace" window?
    I program an STM32F429ZI microcontroller (a NUCLEO-F429ZI card), RTT and ITM printf also work but timestamps do not.
    I also tried the reflashed onboard debugger and with J-Link Edu, same problem.
    Am I setting something wrong?
    I attached the screenshots.

    Thank You for advance!
    Images

    • itm00.PNG

      24.27 kB, 824×458, viewed 549 times

    • itm01.PNG

      29.46 kB, 794×450, viewed 537 times

  • Hello,

    Thank you for your inquiry.
    We were able to reproduce this behaviour and it is due to incorrect behaviour by the J-Link software.
    This will be fixed in the next J-Link software update.

    You can subscribe here if you want to receive update notifications:
    segger.com/notification/subscribe.php?prodid=7

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.

  • Hi,

    Great to hear that you are up and running again.
    We will consider this case as solved now.

    Best regards,
    Nino
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.