SystemView v3.12 RPM is malformed / broken : installer does not detect upgrade..

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • SystemView v3.12 RPM is malformed / broken : installer does not detect upgrade..

      When trying to install latest Segger tools including SystemView the OS package manager does not see this new SystemView as an upgrade of existing / installed SystemView already.
      This is most likely , because Segger's latest RPM is not correctly formed / not upgrading/updating existing install.

      dnf install JLink_Linux_V680d_x86_64.rpm Ozone_Linux_V320b_x86_64.rpm systemview-3.12.x86_64.rpm

      Installing:
      SystemView x86_64 3.120-1
      @commandline 6.2 M
      Upgrading:
      jlink x86_64 6.804-1 @commandline 37 M

      ozone x86_64 3.20.2-1 @commandline 25 M


      Exists on system before trying to upgrade:

      systemview.x86_64 : SEGGER SystemView
      jlink.x86_64 : SEGGER J-Link tools
      ozone.x86_64 : SEGGER Ozone - the J-Link Debugger
      libjaylink.i686 : Library for SEGGER J-Link and compatible devices
      libjaylink.x86_64 : Library for SEGGER J-Link and compatible devices

      sudo dnf info systemview
      Last metadata expiration check: 0:44:50 ago on Tue 30 Jun 2020 03:17:32 PM AEST.
      Installed Packages
      Name : systemview
      Version : 2.52.4
      Release : 1
      Architecture : x86_64
      Size : 3.4 M
      Source : systemview-2.52.4-1.src.rpm
      Repository : @System
      From repo : @commandline
      Summary : SEGGER SystemView
      URL : segger.com
      License : Proprietary
      Description : This package provides software tools
      : for SEGGER SystemView.
    • Hi,

      Thank you for your inquiry.
      The behaviour is intended as SystemView V2 was essentially a complete different software than V3.
      So it is possible that the V2 package will not be detected as a predecessor of V3.

      But from V3 on the packages should be consistent and upgradable with the rpm packages of newer V3 versions.

      Best regards,
      Nino
      Please read the forum rules before posting: Forum Rules

      Keep in mind, this is not a support forum. Its main purpose is user to user interaction.
      Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
      Should you be entitled to support you can contact us via our support system: segger.com/ticket/

      Or you can contact us via e-mail.