[SOLVED] J-Scope - Is it possible to use multiple channels?

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [SOLVED] J-Scope - Is it possible to use multiple channels?

    Hello,

    I have found that JScope is a great tool but it is not developed anymore?

    I was wondering is it possible to use multiple channels in parallel like:
    JScope_t4u4
    JScope_t4u4i4

    So both channels can be updated iindependently of each other?
    With single channel the use is very limited because there must be a thread/call from timer to update values.
    It would be very helpfull to push values to channels in multiple places of code with synchronisation.

    If I would like to write my own JScope do I need to buy some SDK to integrate with DLL?
  • Hello,

    yes, you can use multiple channels in the way you described.
    But every data packet has to contain data for each channel (8/12 bytes in your case).

    If you want to write your own application, I recommend our SDK:
    segger.com/products/debug-prob…nk/technology/j-link-sdk/

    Best regards
    Arne
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/

    Or you can contact us via e-mail.