Application log started
- J-Flash V6.80a (J-Flash compiled May 29 2020 16:27:25)
- JLinkARM.dll V6.80a (DLL compiled May 29 2020 16:27:00)
Reading flash device list [C:\Program Files (x86)\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
- List of flash devices read successfully (451 Devices)
Reading MCU device list ...
- List of MCU devices read successfully (7772 Devices)
Creating new project ...
- New project created successfully
Connecting ...
- Connecting via USB to probe/ programmer device 0
- Probe/ Programmer firmware: J-Link V9 compiled Dec 13 2019 11:14:50
- Device "S3C2440A" selected.
- Target interface speed: 4000 kHz (Fixed)
- VTarget = 3.293V
- Could not measure total IR len. TDO is constant high.
- TotalIRLen = 4, IRPrint = 0x01
- JTAG chain detection found 1 devices:
- #0 Id: 0x0032409D, IRLen: 04, ARM9 Core
- Executing init sequence ...
- Initialized successfully
- Target interface speed: 4000 kHz (Fixed)
- Found 1 JTAG device. Core ID: 0x0032409D (None)
- Connected successfully
Reading entire flash chip ...
- 1 sector, 1 range, 0x0 - 0x7FFFFFFF
- Start of determining flash info (Bank 0 @ 0x00000000)
- ERROR: Could not find CFI compliant flash device
- ERROR: Error while determining flash info (Bank 0 @ 0x00000000)
- ERROR: Failed to read back target memory
Disconnecting ...
- Disconnected
Solution please
- J-Flash V6.80a (J-Flash compiled May 29 2020 16:27:25)
- JLinkARM.dll V6.80a (DLL compiled May 29 2020 16:27:00)
Reading flash device list [C:\Program Files (x86)\SEGGER\JLink\ETC/JFlash/Flash.csv] ...
- List of flash devices read successfully (451 Devices)
Reading MCU device list ...
- List of MCU devices read successfully (7772 Devices)
Creating new project ...
- New project created successfully
Connecting ...
- Connecting via USB to probe/ programmer device 0
- Probe/ Programmer firmware: J-Link V9 compiled Dec 13 2019 11:14:50
- Device "S3C2440A" selected.
- Target interface speed: 4000 kHz (Fixed)
- VTarget = 3.293V
- Could not measure total IR len. TDO is constant high.
- TotalIRLen = 4, IRPrint = 0x01
- JTAG chain detection found 1 devices:
- #0 Id: 0x0032409D, IRLen: 04, ARM9 Core
- Executing init sequence ...
- Initialized successfully
- Target interface speed: 4000 kHz (Fixed)
- Found 1 JTAG device. Core ID: 0x0032409D (None)
- Connected successfully
Reading entire flash chip ...
- 1 sector, 1 range, 0x0 - 0x7FFFFFFF
- Start of determining flash info (Bank 0 @ 0x00000000)
- ERROR: Could not find CFI compliant flash device
- ERROR: Error while determining flash info (Bank 0 @ 0x00000000)
- ERROR: Failed to read back target memory
Disconnecting ...
- Disconnected
Solution please