Hello,

The display format of a variable named 'value' can not be changed, at least in Local Data window.

Steps to reproduce:

1. Add the following function to your project, add a call to the function.

2. Compile, run on an ARM target.

3. Step into the function.

4. In Local Data window:

-- select variable 'value', press 2, 3, 4
-- right click -> Display As -> Hex, Decimal, Binary

Expected behaviour:

display format of the variable 'value' should change accordingly.

Actual behaviour:

display format of the variable 'value' does not change.


Host: xubuntu 18.something
Target: nRF52 DK
Compiler: arm-none-eabi-gcc 9.2.1
Compiler options: -O0 -g3
Ozone: V3.10g


Kind regards
Vadim

Hello,

The only SEGGER-related file is Ozone project file, see attached. I can not attach the project source files for legal reasons.

Kind regards,
Vadim

Hello Nino,

I can reproduce it with NordicSemi SDK v16 on nRF52 DK board. It has on-board Segger J-Link.


The project I used is nRF5_SDK_16.0.0/examples/ble_peripheral/ble_app_blinky

Makefile: nRF5_SDK_16.0.0/examples/ble_peripheral/ble_app_blinky/pca10040/s132/armgcc/Makefile

I've changed the optimisation flags there to OPT = -O0 -g3 and ran make from the directory where the Makefile is.

I have also noticed that value is not the only affected variable. If a variable is named pc, or lr, or r0, it is also not possible to change the variable's display format, see attached picture. The variable p can be displayed in any format (binary, decimal, hex), the variable value is defaulted to decimal, and the variable pc is hex.

Kind regards,
Vadim

Hello Nino,

I've tried the version 3.10i -- the original problem with the variable 'value' has been fixed for me.

Kind regards,
Vadim