[ABANDONED] JLinkError: Timeout while restoring target

This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

  • [ABANDONED] JLinkError: Timeout while restoring target

    Hello,
    I am getting this error while trying to flash using jlink:

    Shell-Script

    1. JLinkError: Timeout while restoring target, core does not stop. (PC = 0x0000044A, XPSR = 0x01000000, SP = 0x10003F78)!
    2. Timeout while preparing target, core does not stop. (PC = 0x0FE101D0, XPSR = 0x61000003, SP = 0x20000370)!
    3. Failed to initialize RAMCodeTimeout while restoring target, core does not stop. (PC = 0x0000044A, XPSR = 0x01000000, SP = 0x10003F78)!Timeout while preparing target, core does not stop. (PC = 0x0FE101D0, XPSR = 0x61000003, SP = 0x20000370)!
    4. Failed to initialize RAMCode

  • Hi,
    Thank you for your inquiry.

    Could you please provide more specific information?

    1) Which device are you trying to flash?
    2) Do you use custom hardware or an evaluation board? In the latter case which one?
    If custom hardware, do you experience the same problem on an evaluation board?
    3) Could you please send us a J-Link log file? How to enable:
    https://wiki.segger.com/J-Link_DLL#Enable_J-Link_Log_File
    4) Which tool do you use to flash your device?
    5) Are you using the J-Link with the SN you provided in your profile while registration?

    Best regards,
    Fabian
    Please read the forum rules before posting.

    Keep in mind, this is *not* a support forum.
    Our engineers will try to answer your questions between their projects if possible but this can be delayed by longer periods of time.
    Should you be entitled to support you can contact us via our support system: segger.com/ticket/
    Or you can contact us via e-mail.